ADC Campus-REX2 RS Manuale Utente

Pagina di 166
Chapter 8 - Internetworking and Management Overview
 
120
Campus-REX2 RS Interface Card User Manual
C
OMPOSITION
 
OF
 
A
 C
AMPUS
-RS S
YSTEM
Campus-RS products accommodate a wide range of network interfaces and 
access speeds in a single platform solution. A Campus-RS system comprises 
these primary elements:
Campus-RS desktop unit—The desktop unit provides a DSL (WAN) 
interface that connects to a line unit (DSL interface) in a Campus-Star 
chassis or back-to-back with another desktop unit DSL interface. You 
can then install any of the customer interface cards listed on 
 for 
the customer-side network connection.
Campus-Star chassis—This chassis or concentrator provides aggregation 
for up to 14 DSL line connections. Each line connection is made using a 
DSL line unit that connects to a DSL line unit in another Star Chassis or 
to the DSL interface of a desktop unit. You can then install any one of the 
customer interface cards listed below to complement each DSL line unit 
in the chassis for the customer-side network connection.
You can install a Campus-RS Management Unit (CMU) into the chassis 
for SNMP management of components in the chassis and for 
management of elements attached to the chassis. 
Customer interface cards—For connection to the customer network for 
voice, video, and data, the following interface cards are available to 
install into the desktop unit or the Campus-Star chassis:
serial data interfaces such as RS-449, RS-530, RS-530A, V.35, and 
X.21 for connections to a router or other data equipment (with this 
customer interface card, the maximum DSL line connection rate can 
be up to 4.608 Mbps)
flex interface with two serial data ports for RS-449, RS-530, 
RS-530A, V.35, or X.21 interfaces and one DSX-1 voice interface 
(with this customer interface card, the maximum DSL line 
connection rate can be up to 1.544 Mbps)
CSU/DSU interface (with this customer interface card, the 
maximum DSL line connection rate can be up to 1.544 Mbps)
G.703 (E1) interface (with this customer interface card, the 
maximum DSL line connection rate can be up to 2.048 Mbps)
10/100Base-T bridge/router interface (with this customer interface 
card, the maximum DSL line connection rate can be up to 4.6 Mbps)