ADC Campus-REX2 RS Manuale Utente
Chapter 4 - Managing System Parameters
Campus-REX2 RS Interface Card User Manual
67
S
ETTING
THE
T
IME
AND
D
ATE
The time and date parameters provide a common time and date stamp
for system functions such as alarm indications or performance monitoring
histories.
for system functions such as alarm indications or performance monitoring
histories.
1
To set the time, type
then press
.
2
At the prompt, type the time in a 24-hour format as shown below then
press .
press .
ENTER NEW TIME (FORMAT HH:MM:SS):
16:34:09
The system displays this new time on System Parameters screen.
3
To set the date, type
then press
.
4
At the prompt, type two numbers for the day, two number for the month,
and the four-digit year, separated by slashes (/), then press
and the four-digit year, separated by slashes (/), then press
.
ENTER NEW DATE (FORMAT MM/DD/YYYY):
04/30/2003
The system displays this new date on System Parameters screen as
Apr 30, 2003.
Apr 30, 2003.
System and date take effect immediately after the values are entered and a
save command is not required.
save command is not required.
I
DENTIFYING
THE
U
NIT
AND
C
IRCUIT
A Campus system supports two different identifiers:
•
The Unit ID indicates an individual Campus unit which can be either a
desktop unit with an interface card or each interface card and line card
combination in a Campus-Star chassis.
desktop unit with an interface card or each interface card and line card
combination in a Campus-Star chassis.
•
The Circuit ID identifies the HDSL circuit between local and remote
units and is the same for both.
units and is the same for both.
Do the following to set or change these identifiers.
1
From the System Parameters menu, type
then press
. At the
prompt, enter the Unit ID using a unique identifier up to 32 characters.
Maximum length is 32 characters.
ENTER NEW UNIT ID: Southall Quad 4
1
ENTER
ENTER
2
ENTER
ENTER
3
ENTER