Sony PCNA-MR10 Manuale

❑

Verify that the computer, server and network settings are configured 
correctly. See the section, “Configuring RoomLink” on page 57.

❑

Check the following, if applicable to your connection environment:

❑

A crossover cable is securely connected between RoomLink™ and a 
single VAIO computer.

❑

The network switch or the router device is turned on. (See the 
information supplied with your network switch or router device, for 
details.)

❑

The router device is turned on before turning on the network media 
receiver.

❑

The network media receiver, network switch, or router device are 
properly connected using the appropriate network cables

*

.

❑

If using a router device, RoomLink™ and the VAIO computer have 
been configured to obtain the IP address automatically.

❑

Verify that the correct server name appears in the Select a server 
screen. (The Select a server screen lists all current and previous servers 
connected to RoomLink). 

❑

When connecting to RoomLink™ for the first time, the network media 
receiver does not automatically bring a VAIO® computer out of Standby 
mode. Subsequent connections bring your VAIO computer out of Standby 
mode.

❑

RoomLink cannot automatically resume the functions of certain VAIO 
computers due to computer settings or the network environment. The 
automatic resume feature is not available for VAIO notebook computer 
models or for VAIO computers that use a wireless LAN connection. This 
Resume feature is available for wired networks only.

* Use network cables that support 100BASE-TX.

✍

The connected server history is lost when the AC power cable is disconnected. All 
settings except for the IP address are lost.