Roland VIMA RK-100 Manuale Utente

Pagina di 76
 
14
 
Before you play
 
1.
 
Make sure that the [Power On] switch located 
at the left side of the keyboard is off (in the 
upward position).
 
2.
 
Connect the AC adaptor to the VIMA, and plug 
the power cord into an AC outlet.
 
You must use the power cord included with the VIMA.
 
fig.ACcord-e.eps
 
924
* To prevent the inadvertent disruption of power to your unit 
(should the plug be pulled out accidentally), and to avoid 
applying undue stress to the DC IN jack, anchor the power 
cord using the cord hook, as shown in the illustration.
941
 
Once you’ve got everything connected properly, you can 
turn on the power using the following procedure. If you 
fail to perform these steps in the correct order, you risk 
causing a malfunction or damaging your speakers.
 
Turning the power on
 
1.
 
Turn the [VOLUME] knob all the way toward 
the left to minimize the volume.
 
fig.VolumeMin-e.eps
 
2.
 
Press the [Power On] switch.
 
fig.PowerOn-e.eps
 
942
 
Due
 
 to a circuitry protection feature, this unit requires 
a few moments after power is turned on before it is 
ready for normal operation.
 
3.
 
Use the [VOLUME] knob to adjust the volume 
(p. 15).
 
Turning the power off
 
1.
 
Turn the [VOLUME] knob all the way toward 
the left to minimize the volume.
 
fig.VolumeMin-e.eps
 
2.
 
Press the [Power On] switch.
 
The screen goes blank and the power is turned off.
 
Getting ready to play
 
Connecting the power cord
To the 
Power 
Outlet
The cord of
the supplied 
AC Adaptor
Cord Hook
 
Turning the power on/off
NOTE
NOTE
RK-100-e.book 14 ページ 2006年7月20日 木曜日 午前10時20分