Panasonic SC-VK960 Manuale Utente

RQTV0239

•  Turn off the demo function. 
•  If you set the clock, demo function will be turned off automatically. 

10

—

•  Press [DIMMER] to brighten the display. 

13

•  You inserted a disc or USB device which the unit cannot play; insert one that 

can.

•  You inserted a blank disc or USB device.
•  You inserted a disc that has not been fi nalized.

11, 33

—
—

•  You haven’t inserted a disc or USB device; insert one.
•  You haven’t inserted the disc or USB device correctly; insert it correctly.

—

14, 33

•  The USB device is drawing too much power. Switch to DVD/CD mode, remove 

the USB and turn the unit off.

—

•  Check and correct the speaker cord connections. 
  If this does not fi x the problem, there is a power supply problem. Consult the 

dealer.

6, 7

•  Disc is dirty. Wipe it clean. 

25

•  Incorrect operation performed. Read the instructions and try again.

—

 

 

 

stands for a number.

•  Trouble may have occurred. The numbers following “H” and “F” depend on the 

status of the unit. Turn the unit off and back to on. Alternatively, turn the unit off, 
disconnect the AC power supply cord, and then reconnect it.

•  If the service numbers fail to clear, note the service number and contact a 

qualifi ed service person.

—

—

“REMOTE 1” or “REMOTE 2” •  Match the modes on the main unit and remote control. Depending on the 

number being displayed ( “1” or “2”), press and hold [ENTER] and the 
corresponding numeric button ([1] or [2]) for at least 2 seconds.

33

•  You can only play DVD-Video if their region number is the same or includes the 

same region number as the unit or if the DVD Video is marked “ALL”. Confi rm 
the region number for the unit on the back of the main unit.

Cover 

•  Select “On” in “On-Screen Messages” in “Display” tab. 

23

•  The operation is prohibited by the unit or disc.

—

•  You are trying to display incompatible contents.

—

•  This disc may be dirty.

25

•  You are trying to play the DivX VOD content that was purchased with a different 

registration code. You cannot play the content on this unit. 

24

•  The DivX VOD content has zero remaining plays. You cannot play it. 

24

•  Clean the heads. 

34

•  If the erasure prevention tabs have been removed, cover the holes with 

adhesive tape. 

27

•  Press [ /I] to release the jammed tray(s) as the unit will switch off. Switch it on 

again and the tray(s) will initialize to the previous tray(s) condition.

•  If this still does not fi x the problem, please consult the dealer.

14

—

When the following situations occur, refer to the 
instructions below to reset the memory:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.

  “– – – – – – – – –” appears on the display.
3 Release [ /I].
  All the settings are returned to the factory preset.
  You will need to reset the memory items.

RQTV0239_1L.indd   37

RQTV0239_1L.indd   37

6/12/07   12:36:55 PM

6/12/07   12:36:55 PM