Pelco C1977M-D Manuale Utente
Pelco Manual C1977M-D (6/02)
[ 35 ]
Table B. General Settings (continued)
Configuration
Default
Item
Settings
Description
Mail reply
none
Similar to the name field. The recipient of the e-mail will
address
identify the sender of the e-mail by this entry.
Multicast Group IP
0.0.0.0
This is the Multicast IP Address. (Network hard–
ware–such as switches, hubs, routers, etc.–must
support the multicasting protocol, ICMP.) This field
sets PelcoNet to use the multicasting protocol,
which makes for a more efficient use of bandwidth.
ware–such as switches, hubs, routers, etc.–must
support the multicasting protocol, ICMP.) This field
sets PelcoNet to use the multicasting protocol,
which makes for a more efficient use of bandwidth.
Enable Multlink
off
When set to “on,” this setting allows the PelcoNet
H.323
unit to support five simultaneous live video
connections.
connections.
Enable Multicast
off
This setting, in conjunction with the two previous
Streaming
settings, can allow an unlimited number of live video
connections. The Enable Multilink H.323 field, as
well as this field, must both be set “on” for this to
work.
connections. The Enable Multilink H.323 field, as
well as this field, must both be set “on” for this to
work.
Multicast Audio Port
50000
This setting designates the TCP/IP port PelcoNet
uses for audio when using the multicasting protocol.
uses for audio when using the multicasting protocol.
Multicast Video Port
60000
This setting designates the TCP/IP port PelcoNet
uses for video when using the multicasting protocol.
uses for video when using the multicasting protocol.
Date
n/a
System date, driven by the internal real-time clock.
The day-of-week need not be entered and will be
automatically adjusted based on the given date.
The day-of-week need not be entered and will be
automatically adjusted based on the given date.
Time
n/a
System time, driven by the internal real-time clock.
Hardware
n/a
Read-only version number of the hardware. Con-
tains unique serial number, type of hardware, and
revision.
tains unique serial number, type of hardware, and
revision.
Software
n/a
Read-only firmware version number. Important infor-
mation should you need technical support.
mation should you need technical support.
Firmware
n/a
Enter the name of the file containing new firmware;
update
clicking the upload button will upload the firmware
and install it on the system.
and install it on the system.
Configuration
n/a
For saving the current configuration of the PelcoNet
download
Transmission System to a PC file.
Configuration
n/a
Reverse operation. The configuration can be overwritten
upload
by the configuration stored in the named file.
When password protection is on, as described in Table B, the program will display the following password
screen if any attempt is made to configure the unit (that is, selecting one of the configuration pages).
screen if any attempt is made to configure the unit (that is, selecting one of the configuration pages).