Combi Baby Carrier Manuale Utente

Retrofit Kit Instruction Manual

*Make sure you have all the parts pictured above before using your child

restraint. If any parts are missing, call Consumer Affairs at 1-800-992-6624.

Step 1: Remove Fabric and Plastic Covers

Step 2: Remove Screw and Washer

3b.

1b.

Models Affected

Combi Centre, Centre ARB, Shuttle

and associated Travel Systems con-

taining the Centre and Shuttle.

Model numbers affected are:

8065, 8074, 8086, 8087 and 8520

and associated Travel Systems

containing the Centre and Shuttle

(Model #4400, 4515, 4520)

Child restraints manufactured prior

to 12/15/2007 are affected by this

recall.

For questions concerning installation please see our

instructional video at the following link:

www.combi-intl.com/retrofit_kit.html

1a.

3a.

While holding back plastic cover,

use phillips-head screwdriver

to remove screw and washer as

shown in figure 3b.

Slide wrench tool under-

neath lower end of plastic

cover to pop open.

*Color of spring may vary.

*Phillips-head screwdriver

not included.

Wrench Tool

Spring

Inspection

Sticker

-1-

Right

Left

Step 3: Assemble Spring

Place screw and washer

into spring loop.

Detach foot-end of fabric cover from shell by unsnapping

and removing adjuster strap and buckle from cover.

Fold cover back as shown in figure 1b to expose the

plastic covers on the left and right.