Zebra Technologies P1071336-002 Manuale Utente
65
WebLink Set/Get/Do Commands
weblink.logging.max_entries
1/20/15
P1071336-002
weblink.logging.max_entries
Description This command specifies the maximum number of individual log entries that
will be stored in the
will be stored in the
weblink.logging.entries
command.
^JUF, ^JUS, ^JUN, ^JUA
, and
device.restore_defaults
do not have any affect on this
setting.
Supported Devices
• iMZ 220™, iMZ 320™
• QLn220™, QLn320™, QLn420™
• ZT210™, ZT220™, ZT230™
Type
setvar, getvar, do
Important •
Changes to this command are immediate and may result in some log entries being
lost. If there are N log entries currently in the log, the user sets the max_entires to M, where
M is less than N, the oldest (N-M) log entries will be removed.
M is less than N, the oldest (N-M) log entries will be removed.
Commands
Details
setvar
This command sets the maximum number of log entires that will be stored.
Format:
! U1 setvar "weblink.logging.max_entries" "value"
Values:
0 ‐ 10000
Note •
Setting the value to 0 disables logging.
Default:
"0"
getvar
This command returns the setting for the maximum number of log entries that will be stored.
Format:
! U1 getvar "weblink.logging.max_entries"
do
This command sets the maximum number of log entires that will be stored.
Format:
! U1 do "weblink.logging.max_entries" "value"
Values:
0 ‐ 10000
Note •
Setting the value to 0 disables logging.
Default:
"0"