Mitsubishi Electronics A1SD75P1-S3/P2-S3/P3/S3 Manuale Utente
12 - 36 12 - 36
MELSOFT
12. USEFUL FUNCTIONS
12.9 Tracks Display
Using the tracks display function in the trace mode, show the axes for interpolation
control and simultaneous start as track data.
When you selected AD75P# in Change AD75 model, you cannot choose the trace
mode.
control and simultaneous start as track data.
When you selected AD75P# in Change AD75 model, you cannot choose the trace
mode.
12.9.1 Tracks display condition setting
PURPOSE
To execute the tracks display, set the trace starting conditions and the data to be
traced.
traced.
BASIC OPERATION
1. Choose Tracks display.
Double-click.
Double-click.
2. Click the "Trace Cond." button on the tracks display main screen.
3. Set the trace intervals, trigger condition, data type to be traced, etc. in the Trace
3. Set the trace intervals, trigger condition, data type to be traced, etc. in the Trace
condition dialog box.
4. Click the "OK" button in the Trace condition dialog box.
5. For the tracing operation after that, refer to Section 12.8.2.
5. For the tracing operation after that, refer to Section 12.8.2.
DISPLAY/SETTING SCREEN