Parker Products OPS1200 Manuale Utente
OPS1200 User’s Manual
14
CONTRAST
(OPS1200 Display and Keyboard Only)
Sets up the display viewing contrast
Format:
Format:
CONTRAST +{value}
CONTRAST
–
(value)
Group: Character
I/O
Units:
none
See also: CLS
This command modifies the display viewing contrast. The value increases (+) or
decreases (-) the contrast level by increments of 1. The contrast value set is stored in
non-volatile memory on the OPS1200 module.
The following example increments the contrast value by 3:
decreases (-) the contrast level by increments of 1. The contrast value set is stored in
non-volatile memory on the OPS1200 module.
The following example increments the contrast value by 3:
Usage example:
CONTRAST +3