Philips SHC8575 Manuale Utente
2
8
Connect the transmitter to an audio
device with the stereo cable (Fig. H).
»
The red LED is on when it is
connected.
9
(For SHC8575 only) To enjoy the sound
enhancement features, switch the button
to ON/OFF/TREBLE (Fig. I).
2 Get started
Note
•
Before using the headphones for the first time,
charge the supplied batteries for at least 16 hours.
•
Only use Philips rechargeable shortened sleeve
NiMH batteries with your headphones. Other
types of rechargeable batteries cannot be charged
with this system.
•
AAA alkaline batteries can be used to operate the
headphones, but CANNOT BE CHARGED WITH
THIS SYSTEM.
•
If the volume of the audio source is insufficient, the
transmitter automatically turns off.
1
Install the supplied batteries (Fig. B).
2
Power on the transmitter (Fig. C).
»
The red LED is off if no audio source is
connected at initial setup.
»
The red LED is on when audio source
is connected.
»
The red LED is off if no audio source is
connected for four minutes.
3
To charge the headphones, place the
headphones onto the energizing docking
station (Fig. D).
»
Headphones: the red LED is off
during charging.
»
Transmitter: the green LED is on
during charging and is off when the
headphones are fully charged.
4
Power on the headphones (Fig. E).
»
The red LED is on.
5
Press and hold AUTO TUNING on the
headphones for one second to tune to
the correct transmission channel (Fig. F1).
6
If there is interference from other
transmitters, adjust the transmission
channel of the transmitter at the back,
then repeat step 5 (Fig. F2).
7
Adjust the volume of the headphones to
the suitable listening level (Fig. G).
EN