Garmin 340c Manuale Utente

A

PPendIx

 > 

s

PecIfIcAtIons

 

And

 o

PtIonAl

 A

ccessorIes

Size: 6.2" H x 6.3" W x 3.1" D (15.8 cm x 16.0 cm x 8.3 cm)
Weight: 2.25 lbs. (1.02 kg)
display: 5.0" diagonal (12.7 cm), 4.0" H x 3.0" W, 256-color TFT display 

with adjustable brightness (234 x 320 pixels) 
Case: Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 

standards
Temp. Range: 5°F to 131°F (-15°C to 55°C) 
Power

Source: 10-33v DC 
Usage: 17 watts max. at 10v DC; 15 watts at 13.8v DC nominal
Fuse: AGC/3AG - 3.0 Amp 

power: Dual frequency, 500 watts (RMS), 4,000 watts (peak to peak);  

Dual beam, 400 watts (RMS), 3,200 watts (peak to peak)
Frequency: 50/200 kHz (dual frequency), 80/200 kHz (dual beam)
depth: 1,500 feet (dual frequency), 900 feet (dual beam) 
(Depth capacity is dependent on water salinity, bottom type, and other water 

conditions.)

You can use Simulator mode to practice and learn the operation 

of the Fishfinder. If the Fishfinder does not detect a transducer, it 

automatically starts in Simulator mode. 
While in Simulator mode, the Fishfinder shows a bottom scene, 

and you can control the Fishfinder (except the Gain and Auto Gain 

options). If no keys are pressed for two minutes, the Fishfinder 

automatically resets to default settings while in Simulator mode. 
To exit Simulator mode, turn off the Fishfinder.

Purchase the following optional accessories on the Garmin Web site:
Quick-release flush mount kit—mounts your Fishfinder flush 

on the bulkhead or cabin wall. Press the side clips to release the 

Fishfinder so you can take it with you. 
CANet™ connection kit—allows you to connect your Fishfinder 

340C to CANet-capable Garmin chartplotters, so you can read 

sonar displays on chartplotters located elsewhere in the boat.

Go to www.garmin.com for the following information:
•  The most recent list of available accessories.
•  Documentation updates.