Garmin PN 906-2001-00 Manuale Utente

Press and release Deckmount (on/off) button, usually found on stern of boat close 
to the out board.  The deckmount light and standby LED on the hand held will both 
blink, the autopilot system is in a start-up mode and no operations are available for 30 
seconds.

When the STBY LED turns solid press the bull’s eye and release to engage the 
autopilot.

When the AUTO LED is solid the autopilot is engaged.

Press and hold the left straight arrow button to make a 

port turn, AUTO LED will 

start blinking, to stop turn release button, AUTO LED will revert to solid when a 
new heading is captured.  Or momentarily press button to make a 1 degree heading 
change.  (Momentarily pressing the button twice = 2 degree change, three times = 3 
degree change, etc.)

Press and hold the right straight arrow button to make a 

starboard turn, AUTO LED 

will start blinking, to stop turn release button, AUTO LED will revert to solid when 
a new heading is captured.  Or momentarily press button to make a 1 degree heading 
change.  (Momentarily pressing the button twice = 2 degree change, three times = 3 
degree change, etc.)

STBY LED

AUTO LED

Bull’s eye

2