Schumacher PI-140 Manuale Utente

• 2 •

SAVE THESE INSTRUCTIONS – This manual will show you how to use 

your inverter safely and effectively. Please read, understand and follow these 

instructions and precautions carefully, as this manual contains important safety 

and operating instructions. The safety messages used throughout this manual 

contain a signal word, a message and an icon.
The signal word indicates the level of the hazard in a situation.

Indicates an imminently hazardous situation which, if not avoided, will 

result in death or serious injury to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, 

could result in death or serious injury to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could 

result in moderate or minor injury to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could 

result in damage to the equipment, vehicle or property.

Pursuant to California Proposition 65, this product contains chemicals 

known to the State of California to cause cancer and birth defects or 

other reproductive harm. Wash hands after handling.

This manual contains important safety and operating instructions.

1.1  Keep out of reach of children.

1.2  For the most effective use, place the power 

inverter on a flat surface.
1.3  Keep the inverter well ventilated in order to properly 

disperse heat generated while it is use. Make sure there are several inches of 

clearance around the top and sides and do not block the slots of the inverter.

1.4  Make sure the inverter is not close to any potential source of flammable fumes  

or clothing.

1.5  Do not place the inverter in areas such as battery compartments or engine 

compartments where fumes or gases may accumulate.

1.6  Keep the inverter dry. DO NOT allow the inverter to come into contact with rain  

or moisture.

1.7  DO NOT operate the inverter if you, the inverter, the device being operated or any 

other surfaces that may come into contact with any power source are wet. Water and 

many other liquids can conduct electricity, which may lead to serious injury or death.