Whirlpool RF388LXG Manuale Utente
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range” section.)
time of day. (See “Setting the clock” in the “Using
Your Range” section.)
1.
Press AUTO CLEAN.
This will automatically set a 3
1
⁄
2
-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄
2
hour before the cycle is over.
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
shorter than 3
1
⁄
2
hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄
2
-4
1
⁄
2
hours shows on the display.
•
Use 2
1
⁄
2
hours for light soil.
•
Use 3
1
⁄
2
-4
1
⁄
2
hours for average to heavy soil.
3.
Start the oven.
The door will lock as soon as you press
START/ENTER.
START/ENTER.
4.
After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
reaches normal baking/roasting temperatures:
LOCK’D goes off and the door unlocks.
5.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge.
off any residue or ash with a damp cloth or sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
cleanser or cleaning sponge.
S
ETTING THE CONTROLS
26
USING THE SELF-CLEANING CYCLE
PRESS
YOU SEE
AUTO
CLEAN
CLEAN TIME
PRESS
YOU SEE
(example shows 4
1
⁄
2
-hour
cleaning time)
YOU SEE
CLEAN
HR
MIN
CLEAN TIME
PRESS
YOU SEE
START
5 SEC
ENTER
HEAT
LOCK'D
CLEAN TIME
ON