Maytag TM-1 Manuale Utente

Pagina di 48
3
INSTALLATION,
CONT.
Door Adjustment
(IF NEEDED)
• Retighten screws after making
adjustments.
* Refer to installation instructions for
more information.
Door should be level when the cabinet is
level.
• The freezer door is too high.
• Both doors are too high.
• Both doors are too low.
Top-Mount Handle
TOP MOUNT HANDLE INSTALLATION INSTRUCTIONS
TOP OF FREEZER DOOR
ALIGN HANDLE OVER SCREW HOLES.
FIRST INSTALL THE "A" SCREWS TO
SECURE HANDLE, FOLLOWED BY THE
"B" SCREWS.  
DO NOT OVER TIGHTEN.
NO. 2 PHILLIPS 
SCREW DRIVER 
IS REQUIRED
FOR 
INSTALLATION.
A
A
B
B
NOTE: ALL HANDLE TIE DOWN 
SCREW HOLES AT THE TOP AND 
BOTTOM OF THE DOORS ARE SIZED 
FOR SELF THREADING SCREWS. 
DO 
NOT DRILL THEM TO A LARGER SIZE.
REFRIGERATOR DOOR HANDLE WITHOUT EXTENSION TRIM
ALIGN HANDLE OVER SCREW
HOLES.  FIRST INSTALL THE "A"
SCREW TO SECURE HANDLE,
FOLLOWED BY THE "B" SCREW.
DO NOT OVER TIGHTEN.
NO. 2 PHILLIPS 
SCREW DRIVER 
IS REQUIRED
FOR 
INSTALLATION.
INSTALL SCREW IN
HANDLE HOLE.  
DO
NOT OVER TIGHTEN.
SNAP EXTENSION INTO
PLACE AT THE BOTTOM
OF THE HANDLE.
A B
REFRIGERATOR DOOR HANDLE WITH EXTENSION TRIM
NO. 2 PHILLIPS SCREW DRIVER IS
REQUIRED FOR INSTALLATION.
ALIGN HANDLE OVER SCREW
HOLES.  FIRST INSTALL THE "A"
SCREW TO SECURE HANDLE,
FOLLOWED BY THE "B" SCREW. 
DO NOT OVER TIGHTEN.
INSTALL SCREW IN HANDLE
HOLE. 
DO NOT OVER TIGHTEN.
SLIDE HANDLE 
        EXTENSION OVER
            BRACKET AT 
              BOTTOM OF 
               DOOR. 
SNAP TOP OF EXTENSION
INTO PLACE AT THE 
BOTTOM OF THE 
HANDLE.
       ON CERTAIN MODELS
REMOVE BACKING 
FROM TAPE. 
AFTER 
STEP 5
 
APPLY 
PRESSURE.
A B