Danby DWC458BLS Manuale Utente

• A fuse in your  home may be
broken or a circuit breaker
tripped.
• Power surge.

• Plug not fully inserted into wall
outlet. 

• Temperature set too high.

• Door(s) not shut properly, or
opened excessively. 

• Recently added a large quantity
of warm bottles to the cabinet. 

• This audible ‘clicking’noise
may be heard as the wine cooler
ends or begins a cooling cycle. 

• High humidity conditions in the
home. 

• Door(s) not shut properly, or
opened excessively. 

• Replace fuse or reset circuit
breaker. 

• Unplug the wine cooler, wait a
few seconds, then plug it back in.
• Make sure the 3-prong plug on
the wine cooler is fully inserted
into the outlet.

• Verify the temperature control 
setting; adjust if necessary. 
• Ensure that the doors are fully
closed and that the gaskets are 
sealing against the cabinets. Open
the doors only as needed and for
short periods of time. 
• Limit the quantity of warm 
bottles introduced at one time.
Attempt to phase in the load 
introduction if possible.

• No user intervention necessary;
this sound is normal. 

The condensation will subside

once humidity conditions return to
normal. 
• Ensure that the doors are fully
closed and that the gaskets are 
sealing against the cabinets. Open
the doors only as needed and for
short periods of time. 

7