Tricity Bendix TB 180 TF Manuale Utente

4

A -  Thermostat control for fridge and freezer compartments
B -  Dairy compartment
C -  Storage shelf
D -  Bottle storage shelf
E -  Salad drawer
F -  Glass shelf 
G -  Wire shelves
H -  Frozen food storage
I  -   Shelf for freezing fresh foods
J -  Ice tray

17

1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store

food in a cool place.

3. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3

inches) of packing;

4. Remove the feet (2-3)
5. Remove bottom hinge (1).
6. Remove the freezer door by releasing it from the

middle hinge (H).

7. Unscrew the middle hinge.
8. Slide out the fridge door from pin (G), unscrew

the latter and then screw it down into the hinge

hole provided on the opposite side, after having

removed the small plugs which should then be

fitted on the opposite side.

9. Refit the fridge door and replace the middle hinge

to the left hand side.

10.Replace the door and bottom hinge (1) on the

opposite side.

11.Refit the feet (2-3) on the opposite side.
12.Unscrew the handles. Refit them on the opposite

side after having pierced the plugs with a punch.

Cover the holes left open with the plugs

contained in the documentation pack.

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

PR220

Printed on recycled paper

D715 PIED/M