Hitachi r-sf42bms Manuale Utente

Ice

Compartment

How to Maintain the Automatic Ice Maker

Ice tray

● Maintain it once a year

Push the

“ICE MAKER” button to stop

supplying water to the ice tray and turn
on the

“OFF” indicator lamp. (Stop ice

making)

Empty the ice tray and wash it lightly

in the stream.

Push the

“ICE MAKER” button to turn on

either

“QUICK” or “NORMAL” indicator

lamp. (Automatic Ice Making starts)

Open the Ice Compartment Door.
① Pull down the lever and ② draw the
frame.
③ Raise the cover ( ▲ part) in the
direction of the arrow.
④ Remove the ice tray from the frame.

※ If the indicator lamp fl ashes,

perform the following operation
after the “OFF” lamp is turned on
in 20 seconds.

Do not use

any cleaning tool that

can scratch it easily such

as scrubbing brush and

plate powder.

● Wash the water supply container thoroughly and replace it

after drying it if you stop ice making and you are not to use the
Automatic ice maker for a while.

● In particular, dry the water fi lter thoroughly.

Notice

Cover

▲ part

Frame

Lever

Is the lever in

horizontal state?

Lever

Horizontal

Click

① Set the ice tray and ② close the
cover.
③ Make the frame horizontal and
push it into the end, and
④ Pull up the lever.

Light ON

● If you cannot push the frame of the ice tray into the end, the ice tray drive motor may have operated.

Remove the ice tray once and push the frame in, and wait 1 minute after closing the Ice Compartment Door.
Preparation for the ice tray drive motor fi nishes, and you can set the ice tray.

Notice

■ Do not put your hand in the mechanical part

of the Automatic ice maker.

● You may be injured when the Ice tray turns.

Warning

Push this button to turn

on the indicator lamp

Light ON

Press this button to turn on the

“OFF” indicator lamp.