Haier H CR1 7 Manuale Utente

English

t0DDBTJPOBMMZUIFSFNBZCFQPXFSJOUFSSVQUJPOTEVFUPUIVOEFSTUPSNT

or other causes. Remove the power cord from AC outlet when a power 
outage occurs. When power has been restored, replug power cord 
to AC outlet. If outage is for a prolonged period, inspect and discard 
spoiled or thawed food in freezer and refrigerator. Clean refrigerator 
before reusing.

t'PSMPOHWBDBUJPOTPSBCTFODFT FNQUZGPPEGSPNSFGSJHFSBUPSBOE

freezer, move the temperature dial to the "0" position and clean 
the refrigerator and door gaskets according to "General Cleaning" 
section. Prop doors open, so air can circulate inside.When moving, 
always move the refrigerator vertically. Do not move with the unit lying 
down. Possible damage to the sealed system could occur.

t5IFSFGSJHFSBUFSTIPVMECFMPDBUFEJOUIFDPPMFTUBSFBPGUIFSPPN

away from heat-producing appliances or heating ducts, and out of 
direct sunlight.

t-FUIPUGPPETDPPMUPSPPNUFNQFSBUVSFCFGPSFQMBDJOHJOUIF

refrigerator. Overloading the refrigerator forces the compressor to run 
longer and thus increases energy consumption. Foods that refrigerate 
too slowly may lose quality or spoil.

t#FTVSFUPXSBQGPPETQSPQFSMZ BOEXJQFDPOUBJOFSTESZCFGPSF

placing in the refrigerator.

t5IFXJSFTIFMWFTTIPVMEOPUCFMJOFEXJUIBMVNJOVNGPJM XBYQBQFS

or paper towels. Liners interfere with cold air circulation, making the 
refrigerator less efficient.

t0SHBOJ[FGPPEUPSFEVDFEPPSPQFOJOHTBOEFYUFOEFETFBSDIFT

Remove as many items as needed at one time, and close the door as 
soon as possible.