Philips WP3810 Manuale Utente

Pagina di 32
The tap water is contaminated due to plumbing activities or cleaning 
of the water tank.
When you use cloudy water immediately after heavy rain.
Cartridge replacement indicator
Tip: Remove the cover of the filter cartridge and stick the cartridge 
replacement indicator to the inside of the cover. Check the colour of the 
hollow fibre of the filter cartridge through the cartridge window from time to 
time. If the colour of the filter matches the rust brown or dark grey shown on 
the cartridge replacement indicator, replace the filter cartridge (Fig. 27).
To help you determine when to replace the filter cartridge, the water 
purifier and each replacement filter cartridge comes with a self-adhesive 
colour-coded cartridge replacement indicator. Place this replacement 
indicator in a convenient place for future reference.
How to replace the filter cartridge
 1 
 Close the tap and set the water selection lever to the unfiltered 
stream position.  (Fig. 22)
  
 Tilt the used filter cartridge 90° backwards and pull it off the water 
purifier housing (Fig. 23).
  
 Write down the replacement date on the information label of the 
new cartridge.
  
 Tilt the new filter cartridge 90° backwards and insert it into the 
water purifier housing. 
 5 
 Pull the cartridge upwards until it is in upright position.  (Fig. 24)
Environment
Do not throw away the water purifier with the normal household 
waste at the end of its life, but hand it in at an official collection point 
for recycling. By doing this, you help to preserve the 
environment (Fig. 28).
-
-
-
English
1