Electrolux E15TC75HPS Manuale Utente
5
Installation
Your compactor has been designed to require minimum
space without loss of capacity whether free-standing or
built-in.
space without loss of capacity whether free-standing or
built-in.
As shipped, the Compactor is only configured for built in
installations. This appliance can be converted from built-
in to free-standing with the use of Toe Kick Accessory
Kit Model ETC15TKH (sold separately). If additional cord
length is required for free-standing installation, remove
the cord clamp and wire tie on the back of the unit.
caution: Failure to use Toe Kick Accessory Kit Model
ETC15TKH in a free-standing installation may cause the
compactor to be unstable during operation.
installations. This appliance can be converted from built-
in to free-standing with the use of Toe Kick Accessory
Kit Model ETC15TKH (sold separately). If additional cord
length is required for free-standing installation, remove
the cord clamp and wire tie on the back of the unit.
caution: Failure to use Toe Kick Accessory Kit Model
ETC15TKH in a free-standing installation may cause the
compactor to be unstable during operation.
mounting straps
Two under-counter mounting straps are provided. Use
these straps to secure the compactor to the underside of
a countertop. Fasten the slotted end of the straps to the
compactor using the holes in the top of the compactor
cabinet as shown.
these straps to secure the compactor to the underside of
a countertop. Fasten the slotted end of the straps to the
compactor using the holes in the top of the compactor
cabinet as shown.
NOTE: When installing compactor under granite or solid-
surface countertops, bend the mounting straps so they
can be secured to the adjacent cabinetry.
surface countertops, bend the mounting straps so they
can be secured to the adjacent cabinetry.
undEr-countEr opEning
The compactor requires an under-counter opening 15-in.
wide, 34
wide, 34
5
/
8
-in. high, and 4-in. deep.
Plan to provide an electrical
outlet in the opening that
meets all applicable electrical
codes
outlet in the opening that
meets all applicable electrical
codes
and
requirements.
See “Grounding Instructions”
section on Page 3 for specific
information.
section on Page 3 for specific
information.
TOP OF
COMPACTOR
FRONT OF
COMPACTOR
cord cLamp
The compactor is equipped
with a 6-ft. long power cord.
Use the cord clamp to prevent
excess power cord from being
pinched beneath the cabinet
during installation or service.
with a 6-ft. long power cord.
Use the cord clamp to prevent
excess power cord from being
pinched beneath the cabinet
during installation or service.
CORD
CLAMP
Free Standing
Built-in Installations
Opening
15" Wide
34-1/2" High
22" Deep
15" Wide
34-1/2" High
22" Deep
15” W
34
5
/
8
” H
ELECTRICAL
OUTLET
24” d
1” MIN.