Fujitsu MAN3735 Manuale Utente
C141-E124-01EN
3 - 38
3.1.8
MODE SENSE EXTENDED (5A)
Bit
Byte
Byte
7
6
5
4
3
2
1
0
0
X‘5A’
1
LUN
0
DBD
0
0
0
2
PC
Page Code
3
0
0
0
0
0
0
0
0
4
0
0
0
0
0
0
0
0
5
0
0
0
0
0
0
0
0
6
0
0
0
0
0
0
0
0
7
Transfer Byte Length (MSB)
8
Transfer Byte Length (LSB)
9
0
0
0
0
0
0
Flag
Link
This command reports the values for each type of parameter related to the disk drive's physical
attributes, data format, timing for SCSI bus disconnect and reconnect processing, error recovery
procedures, etc., as well as the attributes of those parameters, to the INIT.
attributes, data format, timing for SCSI bus disconnect and reconnect processing, error recovery
procedures, etc., as well as the attributes of those parameters, to the INIT.
The functions of this command are the same as those of the Group 0 MODE SENSE command
(Section 3.1.7) except that the format of data (MODE SENSE data) transferred to the INIT differs
somewhat.
(Section 3.1.7) except that the format of data (MODE SENSE data) transferred to the INIT differs
somewhat.
Figure 3.11 shows the data configuration of the parameter list (MODE SENSE data) transferred to
the INIT by this command. Compared to the 4-byte header in the case of a Group 0 MODE
SENSE command, an 8-byte header is transferred in this command. The meanings of each field
and bit in the header are the same as in the case of the Group 0 MODE SENSE command, except
that the byte positions differ. Also, the contents of the other parameters (block descriptor and page
descriptors) are the same as in the case of the Group 0 MODE SENSE command.
the INIT by this command. Compared to the 4-byte header in the case of a Group 0 MODE
SENSE command, an 8-byte header is transferred in this command. The meanings of each field
and bit in the header are the same as in the case of the Group 0 MODE SENSE command, except
that the byte positions differ. Also, the contents of the other parameters (block descriptor and page
descriptors) are the same as in the case of the Group 0 MODE SENSE command.