Fujitsu MAN3735 Manuale Utente
C141-E124-01EN
5 - 19
Table 5.3
Sense data error classification (4 of 4)
K*
C*
Q*
Error contents
L*
Recovery method
(See Table 4.4.)
E
1D
00
Miscompare during verify operation
None
24
Data failed to match in the Byte check mode of the
Verify command.
Verify command.
*
K: Sense Key
C: Sense Code
Q: Sub-sense code
L: Logging Necessary? (shown in Section 5.2.3)
Table 5.4
Error recovery processing procedures (1 of 5)
Recovery
Method
Recovery Processing Procedure
0
It is not necessary to perform the error recovery processing. Continue processing.
1
Error recovery processing is impossible. Terminate processing.
2
This is a programming error and error recovery processing is impossible. Terminate
processing and correct the error in the system (INIT) programming.
processing and correct the error in the system (INIT) programming.
3
This is an error in the SCSI protocol and error recovery processing is impossible. Terminate
processing and check the system's SCSI bus operation.
processing and check the system's SCSI bus operation.
4
1)
Reissue the original command. (Retry)
2)
If the command is terminated with the same error when retried, perform recovery
method 3 or 1.
method 3 or 1.
3)
If the command is terminated with a different error when retried, execute the recovery
processing procedure for that error.
processing procedure for that error.
5
1)
After waiting about 1 second, reissue the original command (Retry).
2)
If it doesn't recover after 10 retries, perform recovery method 1.
6
1)
Reissue the original command. (Retry)
2)
If it doesn't recover after 10 retries, perform recovery method 3.
7
1)
Reissue the original command. (Retry)
2)
If it doesn't recover after 10 retries, perform recovery method 1.