Fujitsu MAN3735 Manuale Utente
C141-E124-01EN
3 - 1
CHAPTER 3
COMMAND SPECIFICATIONS
This chapter describes detailed specifications of the SCSI commands which the IDD is equipped with and
how to use them.
how to use them.
3.1
Control/Sense Commands
3.1.1
TEST UNIT READY (00)
Bit
Byte
Byte
7
6
5
4
3
2
1
0
0
X‘00’
1
LUN
0
0
0
0
0
2
0
0
0
0
0
0
0
0
3
0
0
0
0
0
0
0
0
4
0
0
0
0
0
0
0
0
5
0
0
0
0
0
0
Flag
Link
This command checks the status of the disk drive. This command is executed immediately without
queueing in a system which issues only commands with no tags or links.
queueing in a system which issues only commands with no tags or links.
If the IDD is in the ready state and it is possible for it to be used by the application client which
issues this command, a GOOD status is reported for this command.
issues this command, a GOOD status is reported for this command.
If the IDD is not in the ready state, it reports a CHECK CONDITION status for this command.
The sense data generated at this time indicate the IDD's state at this time.
The sense data generated at this time indicate the IDD's state at this time.