Honeywell F76S Manuale Utente

62-3015—4

2

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 
TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 
phone:

Your local Home and Building Control Sales Office (check white pages of your phone directory).

Home and Building Control Customer Logistics
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (612) 951-1000

In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

Models:
Water filters with 100 micron screens and hose connections.

F76S1007: 1/2 in. sweat and NPT threaded tailpieces.
F76S1015: 3/4 in. sweat and NPT threaded tailpieces.
F76S1023: 1 in. sweat and NPT threaded tailpieces.
F76S1031: 1-1/4 in. sweat and NPT threaded tailpieces.
F76S1049: 1-1/2 in. NPT threaded tailpieces.
F76S1056: 2 in. NPT threaded tailpieces.

Dimensions: See Fig. 1.

Materials of Construction:
Body: Brass.
Screen: Stainless Steel.
Internal Construction: Acetal Copolymer.
Seals: NBR.
Ball Valve: Brass with PTFE Seals.
Sump: Engineered Plastic.

NOTE:

Bronze sump available.

Inlet Pressure:
Minimum: 22 psi (with unrestricted backwash discharge).
Maximum:

Plastic Sump: 232 psi.
Bronze Sump: 400 psi.

NOTE:

Pressures above 200 psi require an inlet pressure 
gauge with a range wider than the standard.

Differential: Maximum Recommended: 42 psi.

Operating Pressure Drop: Maximum Recommended: 3 psi 

(with clean screen).

Temperature (maximum):
Plastic Sump: 104°F (40°C).
Bronze Sump: 158°F (70°C).

Pipe Sizes (in in.): 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2.

Connections: Union on inlet and outlet: External NPT 

threaded or sweat.

Capacity: See Table 1.

Shipped with Device: 100 microns.
Available Kits: 20, 50, and 200 microns.

NOTE:  20 microns = 900 mesh (approximate).

50 microns = 350 mesh (approximate).
100 microns = 175 mesh (approximate).
200 microns = 70 mesh (approximate).

Models:
MV876B1000: Valve with 24 Vac motor and timer replaces ball 

valve drain port for automatic backwash at preprogrammed 
intervals. 24V transformer not included. For use with 
F76A,G Filters only.

MV876B1018: Bayonet mounted shaft of 24 Vac motor and 

timer replaces ball valve manual control for automatic 
backwash at preprogrammed intervals. 24V transformer 
not included. For use with F76S Filters only.

Specifications:
Power: 4 VA.
Current: 170 mA.
Voltage: 24 Vac.
Cycle time: 20 seconds (approximate).
Timer: Variable. See Table 2.

Accessories (for F76S only except where noted):
0900747 Sump O Ring Kit (10 O rings) for 1/2 to 1-1/4 in. F76S.
0900748 Sump O Ring Kit (10 O rings) for 1-1/2 to 2 in. F76S.
0901444 Gasket Package (10 gaskets) for any 1/2 in. and 

3/4 in. F76.

0901445 Gasket Package (10 gaskets) for any 1 in. F76.
0901446 Gasket Package (10 gaskets) for any 1-1/4 in. F76.
0901447 Gasket Package (10 gaskets) for any 1-1/2 in. F76.
0901448 Gasket Package (10 gaskets) for any 2 in. F76.
AF11S-1A Screen insert (100 microns) for 1/2 to 1-1/4 in. F76S.
AF11S-112A Screen insert (100 microns) for 1-1/2 to 2 in. F76S.
AF11S-1B Screen insert (20 microns) for 1/2 to 1-1/4 in. F76S.
AF11S-112B Screen insert (20 microns) for 1-1/2 to 2 in. F76S.
AF11S-1C Screen insert (50 microns) for 1/2 to 1-1/4 in. F76S.