Miele DA 217-2 Manuale Utente
Motor unit
(not when operating the external fan)
with air extraction
If a non-return flap is not present in
the venting system, the
If a non-return flap is not present in
the venting system, the
non-return
flap
supplied must be fitted into the
exhaust connection in the motor unit.
The flaps must open upwards.
The flaps must open upwards.
The cooker hood is designed to take
ø 150 mm exhaust ducting.
If 125 mm ø exhaust ducting has to
be used the
ø 150 mm exhaust ducting.
If 125 mm ø exhaust ducting has to
be used the
reducing collar
needs
to be fitted into the exhaust connec-
tion on the motor unit.
(see "Connection for air extraction".
tion on the motor unit.
(see "Connection for air extraction".
With recirculation mode:
Fit the reducing collar onto the ex-
haust connection.
The non-return flap is not required.
Fit the reducing collar onto the ex-
haust connection.
The non-return flap is not required.
First loosely screw the two locking
nuts onto the threaded bolts on re-
taining plate A.
Leave a gap of approx. 3 mm for
hanging the motor on afterwards.
nuts onto the threaded bolts on re-
taining plate A.
Leave a gap of approx. 3 mm for
hanging the motor on afterwards.
Fit the motor unit onto the hooks on
retaining plate A and slide down be-
hind the nuts.
retaining plate A and slide down be-
hind the nuts.
Tighten the nuts.
Installation
27