U-Line 0 U-CLRCO2175B-40 Manuale Utente

u-line.com

1. Remove the existing bottom hinge (three screws) (2).

1. Install the hinge just removed from the bottom to the TOP 

opposite side of the cabinet (three screws) (2).

1. Install plastic screw plugs (three each, top and bottom) (3) into 

holes where hinge hardware was removed.

1. Hold door upright and tilted forward. 

2. Lift door on to bottom hinge closer inserts.

3. Tilt door forward into position.

4. Hold door to keep it from falling.

5. Reinstall hinge screw pin (1) into top hinge using a Phillips 

screwdriver.

Align and adjust the door, see DOOR ALIGNMENT AND 
ADJUSTMENT on page 10.