Guardian Technologies PTDCM (SA12020) Manuale Utente

¬19=l

N8724V1 

 5/00

BATTERY SUPERVISION

AC SUPERVISION

GROUND

+14VDC MAX.

TO MLB TERM. 15

TO MLB TERM. 16

GROUND (SE NOTE)

GROUND (SE NOTE)

DATA IN (WHITE)

LEDRDRA (SEE NOTE)

GROUND (BLK)

DATA OUT (CLOCK) GRN

FROM PS

CONNECTOR J5

}

TO CARD READER A

TO CARD

READER B

NOTE:  Ground terminals are 
common and may be used if
connecting to a module that
requires a power or signal
return line.

NOTE:  Use orange lead for GREEN LED signal (LEDRDRA or 
LEDRDRB) on some HID readers.  All other readers use brown
lead.  Check the label on your reader for proper GREEN LED 
connection.  Connect reader(s) to 5V or 12V per manufacturer's
voltage specification.

GROUND

+12VDC

GROUND (SEE NOTE)

LOGIC POWER IN

BATTERY SUPERVISION

AC SUPERVISION

+5VDC

TRIGGER A

TRIGGER B

+12VDC

GROUND (SEE NOTE)

ZONE B

ZONE A

GROUND

2000

OHMS

EOLR
(RTE)

2000

OHMS

EOLR

(DSM)

ZONE D

ZONE C

GROUND

2000

OHMS

EOLR
(RTE)

2000

OHMS

EOLR

(DSM)

TWISTED PAIR,
TERMINATED

OPTIONAL

DATB 0 (Clock) (GRN)

DATB 1 (Data) (WHT)

LEDRDRB (See Note)

GROUND (BLK)

+5VDC

+12VDC

DOOR B RELAY SUPERVISION

DOOR B DOOR STRIKE (N.O.)

DOOR B RELAY COMMON

DOOR B MAG HOLD (N.C.)

TO MAG LOCK

TO PS TERM 7

TO DOOR STRIKE

GROUND (SEE NOTE)

DOOR A RELAY SUPERVISION

DOOR A STRIKE (N.O.)

DOOR A RELAY COMMON

DOOR A MAG HOLD (N.C.)

TO MAG LOCK

TO PS TERM 7

TO DOOR STRIKE

RELAY CONTACT

CONNECTIONS

NOT TO EXCEED

28V @ 5A

(RESISTIVE LOADS)

NOTE: USE APPROPRIATE
TRANSIENT SUPPRESSION
ON DOOR LOCK DEVICES.

Red:

On when associated relay is energized.

Yellow: Blinks for 1 second during enrollment process.  If this LED blinks or is on at any other

time, there is a hardware problem.  However, expect this LED to blink briefly when
power is applied.

Green:

Three blinks = OK.  Any other pattern indicates hardware problem.

Once the DCM has been mounted and connected, it needs to be enrolled into the system and
configured.  Refer to the PassPoint Express Installation and Setup Guide (N8949) or the
PassPoint Plus Installation and Setup Guide (K4879) for information on enrolling and
configuring Door Control Modules.

For complete warranty information, refer to the documentation accompanying your system.

Copyright © 2000 PITTWAY CORPORATION