DeLonghi 1791006IDL/11.11 Manuale Utente

2

A) If your appliance comes fitted with a plug, it will incorporate

a 13 Amp fuse. If it does not fit your socket, the plug should be
cut off from the mains lead, and an appropriate plug fitted, as
below.

WARNING: Very carefully dispose of the cut off plug after re-

moving the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard.

With alternative plugs not incorporating a fuse, the circuit

must be protected by a 15 Amp fuse.

If the plug is a moulded-on type, the fuse cover must be re-fit-

ted when changing the fuse using a 13 Amp Asta approved
fuse to BS 1362. In the event of losing the fuse cover, the plug
must NOT be used until a replacement fuse cover can be ob-
tained from your nearest electrical dealer. The colour of the
correct replacement fuse cover is that as marked on the base
of the plug.

B) If your appliance is not fitted with a plug, please follow the in-

structions provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

The wires in the mains lead are coloured in accordance with the
following code:

Green and yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains lead  may not correspond
with the coloured markings identifying the terminals in your plug,
proceed as follows:
The green and yellow wire must be connected to the terminal in
the plug marked with the letter E or the earth symbol          or co-
loured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked with
the letter L or coloured red.

N

E

L