Sharp R-21JCA-F Manuale Utente

26

1. Disconnect the power supply cord.
2. Open the door and block it open.
3. Make sure that the smooth surface of the ceramic shelf face

up.

4. Make sure that the rubber packing without a fin of the

ceramic shelf faces the front of the oven.

NOTE: The three (3) rubber packings with the fins and the

one (1) rubber packing without a fin are attached to
the four (4) edges of the ceramic shelf. The one (1)
rubber packing without a fin is the front edge of the
ceramic shelf.

5. Put the front edge of the ceramic shelf into the front edge of

the oven cavity bottom plate.

6. Push down the rear edge of the ceramic shelf into the oven

cavity bottom plate.

7. Now, the ceramic shelf is installed.

WARNING

Make sure that the rubber packing is not caught between the
oven door and the oven cavity front plate, to avoid possible
exposure to excessive microwave energy.

Flat face

Flat face

To right wall 
of oven cavity

To left wall of 
oven cavity

Antenna 
motor shaft

Antenna holder

Stirrer antenna

Stirrer antenna's 
big blade

Centre

Hole

Antenna holder

Stirrer antenna

Antenna holder

Stirrer antenna

Antenna 
motor shaft

Tab

Stirrer antenna assembly

Tab

Antenna 
motor shaft

Antenna 
motor shaft

Oven cavity
bottom plate

Oven cavity bottom plate

Tab

Rear Edge

Push

Front Edge

Ceramic 
Shelf

Oven Cavity