Sharp R-90GC Manuale Utente

A37159,SEC R90GC O/M

TINSEA986WRRZ-D31 SEC R90GC

The oven has a special catalyst which assists with
smoke and odor removal.

Use the Refresh Cycle to
• Condition the heater before using the oven the first time.
• Remove any objectionable odor.
• Keep the catalyst in optimum condition.

Follow the procedure below. The oven temperature will
be maintained at 450 °F when the refresh cycle oper-
ates.

O T H E R   C O N V E N I E N T   F E A T U R E S

P R O C E D U R E

Touch MINUTE PLUS.

1. To use Minute Plus, touch pad within 3 minutes after

cooking, closing the door or touching STOP/CLEAR.

2. Minute Plus can be used to extend cooking times up

to 10 minutes during Automatic Cooking. If you need
other options see AUTOMATIC COOKING TIME AD-
JUSTMENT on page 28.

When the indicator light above the CUSTOM HELP is
flashing, touch the pad to read valuable information.

Minute Plus allows you to cook for a minute at 100%
by simply touching MINUTE PLUS. You can also ex-
tend cooking time in multiples of 1 minute by repeat-
edly touching MINUTE PLUS during manual and auto-
matic cooking.

• Suppose you want to heat a cup of soup for one

minute.

P R O C E D U R E

Touch CUSTOM HELP.

Touch START.

Touch number 4.

1. Remove the turntable from the oven before the

Refresh Cycle. No food should be in the oven.

2. The Refresh Cycle is 30 minutes.

3. During the Refresh Cycle some smoke and odor may

occur. Open a window or use the ventilation fan in
the room.

The oven door, outer cabinet and oven cavity may
be hot.

SEC R90GC O/M,P30-32

03.5.12, 6:02 PM

30