Manualsbrain.com
  1. Manuali
  2. Marche
  3. ECS
  4. A785GM-M
  5. Manuale Utente

ECS A785GM-M Manuale Utente

Scarica
Pagina di 86
11
Installing the Motherboard
CPU Installation Procedure
The following illustration shows CPU installation components.
1
Install your CPU. Pull up the lever away from
the socket and lift up to 90-degree angle.
2
Locate the CPU cut edge (the corner with
the pin hold noticeably missing). Align and
insert the CPU correctly.
3
Press the lever down and apply thermal
grease on top of the CPU.
4
Put the CPU Fan down on the retention mod-
ule and snap the four retention legs of the
cooling fan into place.
5
Flip the levers over to lock the heat sink in
place and connect the CPU cooling Fan power
cable to the CPU fan connector. This com-
pletes the installation.
To achieve better airflow rates and heat dissipation, we suggest that you
use a high quality fan with 4800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink sup-
plied. The form and size of fan/heatsink may also vary.
Installing Memory Modules
This motherboard accommodates four
 
memory modules. It can support four 240-pin
DDR3 1333/1066. The total memory capacity is 32
 
GB
*
.
DDR3 SDRAM memory module table
You must install at least one module in any of the four slots. The total memory
capacity is up to 32
 
GB
*
.
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always
wear a grounding strap when you handle the modules.
The four DDR3 memory sockets (DIMM1, DIMM2, DIMM3, DIMM4) are divided
into two channels and each channel has two memory sockets as following:
ff
ff
Channel 0: DIMM1, DIMM2
Channel 1: DIMM3, DIMM4
Memory module
Memory Bus
 DDR3
 1066
 533 MHz
 DDR3
 1333
 667 MHz
Currently,
 the memory maximum size we have tested is 16 GB.
*