ECS A785GM-M Manuale Utente

35

Using BIOS

This page sets up some parameters for peripheral devices connected to the system.

Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.

Press <Esc> to return to the main menu setting page.

Use this item to enable or disable the onboard IDE interface.

Use this item to enable or disable the onboard SATA mode.

Use this item to enable or disable the USB function.

Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

                      Integrated Peripherals

Onboard IDE Controller

Enabled

SATA Configuration

IDE

Onboard SATA Mode

Enabled

Onboard AUDIO Function

Enabled

Onboard LAN Function

Enabled

    Onboard LAN Boot  ROM

Disabled

Onboard 1394 Function

Enabled

USB Functions

Enabled

Legacy USB Support

Enabled

Onboard JMB362

AHCI Mode

Help Item

F10: Save     ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

DISABLED: disables the
integrated IDE
Controller.
Enabled: enables both
Controllers.

Use this item to enable or disable the onboard Audio function.

Use these items to enable or disable the onboard LAN function.

Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.

Use this item to enable or disable the onboard JMB362 mode.

Use this item to enable or disable the onboard 1394 function.