Frigidaire FGEW2765KF Guida Utente

13

The timer on.oFF pad controls the Minute Timer 

feature. The Minute Timer serves as an extra timer in 

the kitchen that will beep when the set time has run 

out.  It does not start or stop cooking. The Minute Timer 

feature can be used during any of the other oven control 

functions. Refer to “Minimum and Maximum Control Pad 

Settings” for time amount settings.
to set the minute timer (example for 5 minutes)
1.  Press timer on.oFF. “-- --” will appear and 

“timer” will flash in the display.

2.  Press the number pads to set the desired time in the 

display. 

3.  Press start. The time will begin to count down with 

“5:00” and “timer” will stay in the display. 

Note: If start is not pressed the timer will return to the 

time of day after 25 seconds.

4.  When the set time has run out, “end” and “timer” 

will show in the display. The clock will sound with 

3 beeps every 5 seconds until timer on.oFF is 

pressed.

to cancel the minute timer before the set time has 
run out
1.  Press timer on.oFF. The display will return to the 

time of day.

models) 
The add 1 minute pad is used to set the Add 1 Minute 

feature. When the add 1 minute pad is pressed, 

1 minute is added to the Minute Timer feature if this 

feature is already active. If the Minute Timer feature is 

not active and the add 1 minute  pad is pressed, the 

Minute Timer feature will become active and will begin 

counting down from 1 minute. 

The 

 pad controls the Oven Lockout feature. The Oven 

Lockout  feature  automatically  locks  the  oven  door  and 

prevents the oven from being turned on. It does not disable 

the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature

1.  Press and hold 

 for 3 seconds.

2.  After 3 seconds “door loc” will appear, a beep will sound 

and “door” and   will flash in the display. Once the 
oven door is locked the “door” and   indicators will 

stop flashing and remain on along with the “loc”.

1.  Press and hold 

 for 3 seconds. After 3 seconds “door 

oPn” will appear and a beep will sound. The  “door” 
and   will flash in the display until the oven door has 

completely unlocked 

2.  The oven is again fully operational.

The  delaY  start  and  selF  clean  pads  control  the 

Silent Control operation feature. The Silent Control operation 

feature  allows  the  oven  control  to  be  operated  without 

sounds or beeps whenever necessary. If desired the control 

can be programmed for silent operation and later returned 

to operating with all the normal sounds and beeps.
to change control from normal sound operation to 
silent control operation
1.  To tell if your range is set for normal or silent operation 

press and hold delaY start. “-- --” will appear and 

“delaY” will flash in the display.  After 6 seconds “beeP 

on” or “beeP oFF” will appear in the display.

2.  Press selF clean to switch between normal sound 

operation and silent operation mode. The display will 

show either “beeP on” or “beeP oFF”.

Note: If “beeP on” appears, the control will operate with 

normal sounds and beeps.  If “beeP oFF” appears, 

the control is in the silent operation mode.

3.  Press start to accept the change or press cancel 

to reject the change.

note: The control will always beep at the end of a minute 

timer and will beep when a set temperature has been reached, 

even if the control is set to silent operation.