FoodSaver II Turbo Manuale Utente
T H E F O O D S A V E R U S E R M A N U A L
39
Troubleshooting
T H E F O O D S A V E R U S E R M A N U A L
38
The FoodSaver Universal Lid, Bulk Storage Canister,
Square Canister Will Not Vacuum:
1
When using the Universal Lid, make sure that the rim of the
container is smooth and flat. Ragged edges will prevent the
Universal Lid from forming a vacuum.
container is smooth and flat. Ragged edges will prevent the
Universal Lid from forming a vacuum.
2
Make sure the rubber gaskets underneath the lids and the rim
of the container are free from food materials, crumbs, etc.
of the container are free from food materials, crumbs, etc.
3
Make sure the knob on the lid is closing and opening properly
and that there are no food materials caught inside.
and that there are no food materials caught inside.
4
Make sure the Accessory Hose is securely in the Accessory Port
on the appliance and on the lid of the canister.
on the appliance and on the lid of the canister.
The FoodSaver Bottle Stopper Will Not Vacuum:
1
Make sure the Bottle Stopper is fitting snugly inside the bottle.
If it is loose, air may leak in and prevent a vacuum from forming.
If it is loose, air may leak in and prevent a vacuum from forming.
2
Make sure the neck of the bottle and tip of the Accessory Hose
are free from food materials, crumbs, etc. Any gaps will prevent a
vacuum from forming.
are free from food materials, crumbs, etc. Any gaps will prevent a
vacuum from forming.
3
Make sure the Accessory Hose is securely in the Accessory Port on
the appliance and on the Bottle Stopper.
the appliance and on the Bottle Stopper.
If You Cannot Fix the Problem:
Call our Consumer Services Department at the number listed at
the back of this manual.
the back of this manual.
NOTE: For all accessories, make sure that the Accessory
Hose is completely inserted into the appliance and the lid of
the accessory.
Hose is completely inserted into the appliance and the lid of
the accessory.
The Mason Jar Will Not Vacuum:
1
Make sure the Jar Sealer is centered and pressed firmly over the
lid on the Mason jar.
lid on the Mason jar.
2
Make sure the rubber gasket on the Jar Sealer is free from food
materials, crumbs, etc.
materials, crumbs, etc.
3
Make sure the rim of the Mason jar does not have any cracks or
scratches. Any gaps can prevent a vacuum from forming.
scratches. Any gaps can prevent a vacuum from forming.
4
Make sure you aren’t filling the Mason jar too full prior to
vacuum packaging. Always leave at least one inch (1") between
the contents and the lid.
vacuum packaging. Always leave at least one inch (1") between
the contents and the lid.
5
Make sure the metal lid of the Mason jar is not bent.
6
Make sure the Accessory Hose is securely in the Accessory Port
on the appliance and on the Jar Sealer.
on the appliance and on the Jar Sealer.
The FoodSaver Designer Canister Will Not Vacuum:
1
Make sure the rubber gasket on the lid is free from food
materials, crumbs, etc.
materials, crumbs, etc.
2
Make sure the rim of the canister does not have any cracks or
scratches. Any gaps can prevent a vacuum from forming.
scratches. Any gaps can prevent a vacuum from forming.
3
Make sure you aren’t filling the canister too full prior to
vacuum packaging. Always leave at least one inch (1")
between the contents and the lid.
vacuum packaging. Always leave at least one inch (1")
between the contents and the lid.
4
Make sure the Accessory Hose is securely in the Accessory Port on
the appliance and on the lid of the canister.
the appliance and on the lid of the canister.