Phoenix TRIO-PS/1AC/24DC/2.5 2866268 Manuale Utente
Codici prodotto
2866268
102776_01_en
1
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
Phone: +49-(0) 5235-3-00 • Fax: +49-(0) 5235-3-4 12 00 • www.phoenixcontact.com
www.phoenixcontact.com/salesnetwork
Primary switched power supply, 1-phase,
output current: 2.5 A
output current: 2.5 A
TRIO-PS/1AC/24DC/2.5
© PHOENIX CONTACT - 04/2006
Data sheet
INTERFACE
TRIO POWER is the rail mountable 24 V power supply unit
with basic functions. With an output voltage of 24 V DC and
1-phase and 3-phase versions with 60 W or 960 W, it is par-
ticularly suited for use in series production in mechanical en-
gineering. The wide-range input and international certifica-
tion package allows worldwide implementation.
The high MTBF of 500,000 h stands for high supply reliability.
The devices can be connected in parallel to increase the ca-
pacity and redundancy.
The clear LED signaling and the device connection with dou-
ble terminal block for plus and minus for fast potential distri-
bution are further advantages of this device series. A third
terminal block for minus simplifies the grounding on the sec-
ondary side. All power supply units are idle proof and short
circuit proof and provide a regulated and settable output volt-
age of 22.5 V DC to 29.5 V DC with output currents of 2.5 A,
5 A, 10 A, 20 A or 40 A.
with basic functions. With an output voltage of 24 V DC and
1-phase and 3-phase versions with 60 W or 960 W, it is par-
ticularly suited for use in series production in mechanical en-
gineering. The wide-range input and international certifica-
tion package allows worldwide implementation.
The high MTBF of 500,000 h stands for high supply reliability.
The devices can be connected in parallel to increase the ca-
pacity and redundancy.
The clear LED signaling and the device connection with dou-
ble terminal block for plus and minus for fast potential distri-
bution are further advantages of this device series. A third
terminal block for minus simplifies the grounding on the sec-
ondary side. All power supply units are idle proof and short
circuit proof and provide a regulated and settable output volt-
age of 22.5 V DC to 29.5 V DC with output currents of 2.5 A,
5 A, 10 A, 20 A or 40 A.
Description
Danger!
Components with dangerously high voltage and high stored energy are located in the device!
Never carry out work on live parts!
Depending on the ambient temperature and the load, the housing can become very hot!
Never carry out work on live parts!
Depending on the ambient temperature and the load, the housing can become very hot!
Make sure you always use the the latest documentation.
It can be downloaded at
It can be downloaded at
.
A conversion table is available on the Internet at