Smeg WT1123-1 Manuale Utente
User instructions
16
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
BIO
Load
1
2 place-settings
Type of detergent
B
Amount of detergent
3
0 g
Rinse aid setting
5/6
1.2 Washing programs
Before starting a washing program make sure that:
•
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
obstruction.
•
The dishwasher door is securely closed.
HALF LOAD WASH SETTING (certain models only)
This function is ideal for small loads and saves
water and electricity. It is controlled by the HALF
LOAD button (6) and allows washing in the upper
basket only.
This function is ideal for small loads and saves
water and electricity. It is controlled by the HALF
LOAD button (6) and allows washing in the upper
basket only.
IMPORTANT: at the end of the program remember
to deactivate the function to ensure the next
wash is not also carried out in half load mode by
mistake.
to deactivate the function to ensure the next
wash is not also carried out in half load mode by
mistake.
A cutlery basket can be placed in the upper basket, while the lower
basket must be left empty.
basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the
lower basket, since the jet of water will only reach the upper basket.
lower basket, since the jet of water will only reach the upper basket.