Miele CVA615 Manuale Utente

 
 

 

 

 

Refer to Figure 5-46 – Grinder - Apart. 

 

Note: 
Before setting the grinder, remove all coffee from the grinder. 

 

1.  Install the Felt Ring (Item 11). 
2.  Install the carriers (Item 10). 
3.  Install the mounting (Item 7). 
4.  Install the springs (Item 9). 
5.  Install the balls (Item 8). 
6.  Install the Grinding Cone (Item 6), ensure the balls are seated. 
7.  Install the washer (Item 3). 
8.  Install the Intake Worm Gear (Item 2), press down, and turn until the 

coupling engages. 

9.  Tighten the Grinding Cone Screw (Item 1) counter clockwise. (Ensure 

the intake worm gear coupling has engaged properly). 

 

Note: 
Before setting the grinder, remove all coffee from the grinder. 

 

10. Fit the bracket (Item 3). 
11. The blue marking on the carrier (Item 2), has the same position as the 

blue marking on the adjustment ring (Item 1); both point toward the 
front of the appliance. 

12. Turn the Adjustment Ring Clockwise as far as possible. 
13. Turn the Adjustment Ring Counterclockwise by 6 settings so that the 

Adjustment Lever can be secured at a mid setting. 

14. Fit the Adjustment Lever such that the grinder is set to a medium 

grinding grade. 

15. Tighten the Adjustment Lever Fixing Screws. 
16. Push on the handle. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

91