Smeg PL4107X Manuale Utente

 

 

 

 

 
 

To remove the TRAVELLING spray arm, take hold of it and raise it to 
release both the spray arm and the pipe from the tank, then detach the 
spray arm from the pipe. Wash both the pipe and the spray arm in 
running water, re-attach the spray arm to the pipe and return the 
assembly to the seat provided in the tank. 
Once the assembly has been put back in place, check that the 
spray arm turns freely (turn through a couple of revolutions by 
hand) and that the pipe is able to travel without impediments. 
Otherwise, check that it has been fitted correctly. 

 

     

   

 

 
 
 
 

 

•  The central filter H should be inspected regularly and cleaned if 

necessary. To remove it, take hold of the handle, turn anti-clockwise 
and lift. 

• 

Press the central filter H from below to extract it from the micro-filter. 

•  Separate the two parts of the plastic filter by pressing the body of 

the filter in the zone shown by the arrows. 

• 

Remove the central filter by lifting it.