Smeg PL4107X Manuale Utente

 

 

The appliance is not able to measure the amount 
of water loaded accurately (on models with turbine 
flow-regulator only). 

 

Anomaly in the system which distributes water to 
the basket (where installed). 

The maximum level of water for loading has been 
exceeded (on models with turbine flow-regulator 
only). 

 

• The 

E1,  E2,  E3,  E4,  E8,  E9 alarms provoke the “forcing” to end 

cycle of the running program. 

• The 

E5, E6 alarms interrupts the running program once the cause is 

resolved, it will bring bach the execution of the program. 

• The 

alarm 

E7 is visualized at the end of the cycle that comes, 

however, brought to the end since the operation of the dishwasher is 
not harmed. 

 
To “reset” an alarm is necessary: 

 

•  Open and close the door, or turn off and on the machine. At this 

point is possible to program the dishwasher again. 

 

 

 

 
 
 

 

TECHNICAL DATA 

497 

÷ 499 mm 

Free standing: 600 mm 
Semi-integrated: 570 mm  

Free standing: from 850 mm to 870 mm 
Semi-integrated: from 820 mm to 870 mm 

10 Standard place settings 

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) 

See rating plate