Hobart CE6HD ML-138011 Manuale Utente

– 19 –

  1. Press the Program Button to select program 

mode. The button will illuminate to indicate it 
has been selected.

  2. Use the Plus/Minus Buttons to select the 

program to be modifi ed.

  3. Modify the desired cooking phases. The 

program number will blink to indicate that it 
has not been stored.

NOTE: A modifi ed program can be run before storing. 
After the program has run, it can then be stored. It 
is not possible to insert a phase into a program.

  4. Press and hold the Enter Button. The buzzer 

will sound and the program number will stop 
blinking to indicate that the program has been 
stored.

  1. Press the Program Button to select program 

mode. The button will illuminate to indicate it 
has been selected.

  2. Use the Plus/Minus Buttons to select the 

program number to be reviewed. The screen 
will display the fi rst phase of the program.

  3. Press the top Selection Line Button to scroll 

through the phases of the program.

  4. Press the Selection Line Button next to the 

temperature icon to view the set temperature 
on each phase.

  5. Press the START/STOP Button to view total 

cooking time for the selected program.

NOTE: The total cooking time for all phases will be 
displayed unless one of the phases uses the core 
probe or continuous timer mode.

  1. Press the Program Button to select program 

mode. The button will illuminate to indicate it 
has been selected.

  2. Use the Plus/Minus Buttons to select the 

program to be erased.

  3. Press and hold the Enter Button. The buzzer 

will sound and the program will be erased.