Honeywell DR4300 Manuale Utente

NOTE 1:  PID control options include current output plus two discrete outputs for alarms. If ON-OFF or 

time-proportioned simplex control is used, only one discrete output is available for an alarm. 
Time-proportioned duplex control requires the use of both outputs and therefore no relay 
outputs are available for alarms on that pen channel.  Accutune II tuning is a standard feature 
with PID control options. 

NOTE 2:  Customer must supply the input actuation and range information for each input in the Free Form 

section of the order to have the unit supplied with a Certificate of Calibration. 

NOTE 3:  Digital Inputs are only available when ordering outputs in Table I. 

NOTE 4:  4 to 20 mA Retransmission Output includes two outputs per pen for alarms. You must specify 

the type of alarm outputs required (i.e., Relay, SS Relay, Open Collector Outputs). 

NOTE 5:  On key numbers DR4301, DR4302, DR4321, and DR4322 the communication address is fixed; 

the display assembly is required to change it.  Only one DR4301 or DR4321 instrument, or only 
one pen of a DR4302 or DR4322 can exist on the network, otherwise communication conflicts 
will exist. Pen 1 is the default when communications is specified on these models. 

NOTE 6:  Recorder is supplied with one box of 30755820-001, 0 to 100 Even "starter" charts. For special 

range configuration on the DR4301, DR4302, DR4321, or DR4322 Recorder, provide the Input 
Type, Chart Range, Chart Speed, °C or °F, Engineering Units, Linear or Non-Linear Chart Type 
when ordering. 

For example:  Pen 1: "J" Thermocouple, 0-375 °F, 7-Day Linear Chart 

Pen 2: 4-20 mA, 0-1000, 7-Day Linear Chart 

For configuration on Models DR4311, DR4312, DR4331, and DR4332, the customer must 
supply completed "Configuration Worksheets" with order for units to be Factory configured.