Honeywell DR4300 Manuale Utente
Installation
12/03
DR4300 Circular Chart Recorder Product Manual
11
2. Installation
2.1 Overview
Introduction
Installation of the DR4300 recorder consists of mounting and wiring the recorder according to the
instructions given in this section.
instructions given in this section.
Read the pre-installation information below, check the model number interpretation in Section 1, and
become familiar with your model selections, then proceed with installation.
become familiar with your model selections, then proceed with installation.
What’s in this section?
The following is a list of topics in this section.
Topic See
Page
2.1 Overview
2.2 Mounting Considerations and Overall Dimensions
2.3 Mounting Methods
2.4 Wiring Prerequisites
2.5 Input Wiring
2.6 Output Wiring
Pre-installation information
If the recorder has not been removed from its shipping carton, inspect the carton for damage and remove
the recorder. Inspect the unit for any obvious shipping damage and report any damage due to transit to the
carrier.
the recorder. Inspect the unit for any obvious shipping damage and report any damage due to transit to the
carrier.
• Make sure a bag containing mounting hardware is included in the carton with the recorder.
• Check that the model number shown on the chart plate agrees with what you have ordered.
• Check that the model number shown on the chart plate agrees with what you have ordered.