Honeywell DR4300 Manuale Utente

Table 4-2 contains tips that will help you enter the configuration data more quickly. If you can not change 
configuration parameters, check the status of the “LOCK” parameter (see Subsection 4.3.19).  

 

Function 

Tip 

Use the  SET UP  key to display the set up groups. The group titles are 
listed in this section in the order that they appear in the recorder. 

Use the  FUNC  key to display the individual function parameters under 
each group. The prompts are listed in the order of their appearance in each 
group. 

Holding the  SET UP  key in will scroll through the set up groups.  However, 
when any set up group is displayed, you can scroll through the set up groups 
twice as fast using the 

▲ or ▼ key. When in any set up group, hold the 

FUNC  key in to scroll through the prompts within that group. 

Changing values quickly  When changing the value of a parameter, you can adjust a more significant 

digit in the upper display by holding in one key [

▲] or [▼], and pressing the 

other [

▲] or [▼] at the same time. 

•  The adjustment will move one digit to the left. 
•  Press the key again and you will move one more digit to the left. 

To exit Set Up mode, press the  DISP  key.  
This returns the display to the same state it was in immediately preceding 
entry into the Set Up mode. 

If you are in Set Up (configuration) mode and do not press any keys for one 
minute, the recorder will time out and revert to the mode and display that was 
being used prior to entry into Set Up mode.