Zenoah KAM-402 Manuale Utente
11
6. Fuel
• Gasoline is very flammable. Avoid smoking or
bringing any flame or sparks near fuel.
• Wipe up all spills before starting the engine.
• Make sure to stop the engine and allow it cool
• Make sure to stop the engine and allow it cool
before refueling the unit.
• Keep open flames away from the area where fuel
is handled or stored.
• Never use oil for 4 cycle engine use or water cooled
2-cycle engine.
• Never use "FUEL WITH NO OIL (RAW GASOLINE)".
• Never use fuel laced with water.
• Mixed fuels which have been left unused for a period
• Never use fuel laced with water.
• Mixed fuels which have been left unused for a period
of one month or more may clog the carburetor or
result in the engine failing to operate properly. Put
remained fuel into an air-tight container and keep it in
the dark and cool room.
result in the engine failing to operate properly. Put
remained fuel into an air-tight container and keep it in
the dark and cool room.
• Please ask for “mixed gasoline for air-cooled 2-cycle
engines” at your nearest gas station, or use fuel
made by putting unleaded gasoline for automobiles
and air-cooled 2-cycle engine oil into a mixing
container in accordance with the following ratios and
then shaking to mix well.
made by putting unleaded gasoline for automobiles
and air-cooled 2-cycle engine oil into a mixing
container in accordance with the following ratios and
then shaking to mix well.
Mixing ratios:
When using Zenoah genuine 2-cycle oil (FC grade):
When using Zenoah genuine 2-cycle oil (FC grade):
50:1 (100 ml of oil for
every 5 liters of gasoline)
When using commercially available 2-cycle oil (FB
grade):
grade):
25:1(160 ml of oil for
every 4 liters of gasoline)
IMPORTANT
WARNING