Grizzly G9860 Manuale Utente
Ultimate Series Jointers
-13-
Pedestal Switch
Your jointer comes with a pedestal mounted mag-
netic switch for safety and convenience. Simply
bolt the pedestal to the four mounting holes on the
back side of the stand with (4) M10-1.5 x 25 cap
screws and (4) M10 flat washers as shown in
netic switch for safety and convenience. Simply
bolt the pedestal to the four mounting holes on the
back side of the stand with (4) M10-1.5 x 25 cap
screws and (4) M10 flat washers as shown in
Figure 7A & 7B.
Figure 7A.
Mounting the pedestal switch.
Figure 7B.
Mounted pedestal switch.