DeVillbiss Air Power Company AGXV-541 Manuale Utente

PAGE 8      SB-2-628-K

Use in the line between the
source of air supply and the
gun for the purpose of ex-
tracting dirt and entrained
water and oil.  Will also en-
able users to regulate and con-
trol atomization air pressure
to the gun.

Pressure Feed Tanks:  QMG/QMS Galva-
nized and Stainless Steel pressure feed
tanks are intended for use as a pressure
container to supply material at a con-
stant preset pressure.  2, 5, 10 and 15
gallon models available.

KK-5017 Fluid Seal Kit  – For use with
abrasive materials.  Includes 1 brass seal
collar and 3 polyethylene fluid seals.

WARRANTY
This product is covered by DeVilbiss’ 1 Year Limited Warranty.
See SB-1-000 which is available upon request.

Rod Length

16

406

Rod Diameter

3/4

19

Clamp Diameter

3/4

19

The purpose of this test kit is to measure air cap
atomizing air pressure. Used to confirm code com-
pliance and as a daily quality control measure.

KK-5033-28 for JGHV-101-28 air cap
KK-5033-33A for JGHV-101-33A air cap.
KK-5033-46MP for JGHV-101-46MP
KK-5033-83MP for JGHV-101-83MP

11/01

©Copyright 2001 DeVilbiss

Printed in U.S.A.

Allows gun to be mounted on a 1/2" rod.  Kit includes
block and 4 stainless steel set screws.

Joins any single piece
DeVilbiss air cap with
latest version MBC-368 or
MSA-1 retaining ring.
Helps prevent parts loss
and provides easier
assembly.

DeVilbiss has authorized distributors throughout the world.  FOR TECHNICAL ASSISTANCE OR THE DISTRIBUTOR
NEAREST YOU, CALL TOLL FREE 1-888-992-4657 (U.S.A. AND CANADA ONLY).  FOR LOCAL CALLS, SEE LISTING BELOW.

U.S./Canada Sales & Customer Service Office

Address

Telephone No.

GLENDALE HEIGHTS, IL 60139

    195 Internationale Blvd.

(630) 237-5000

Toll Free Fax No. 1-877-790-6965

These brushes are help-
ful in cleaning threads
and recesses of gun
body.

Attaches to the gun stud
(39),clamps onto a  19
mm (3/4") diameter rod
and turns to any angles.

2 gallon (7.6 liters) gal-
vanized tank used  to
clean the inside of hose
and material passages
of the  gun. Availabie in
U.S. only.

Used  to clean the inside
of hose and material
passages of the  gun.

Use on air cap and retain-
ing ring.  Compatible with
all paint materials, con-
tains no silicone or petro-
leum distillates to con-
taminate paint.  MSDS
available upon request.

Used for adjusting pat-
tern size from a remote
air source.