Graco Inc. 311046 Manuale Utente
Cleanup
26
310892F
Caution: If flushing with water, do
not leave water in sprayer. Flush
again with mineral spirits, oil or
Pump Armor and leave this protec-
tive coating in the sprayer to help
prevent freezing or corrosion and
increase sprayer life.
not leave water in sprayer. Flush
again with mineral spirits, oil or
Pump Armor and leave this protec-
tive coating in the sprayer to help
prevent freezing or corrosion and
increase sprayer life.
13. Close prime valve. Trig-
ger gun into flushing pail
to purge fluid from hose.
Open prime valve.
to purge fluid from hose.
Open prime valve.
14. Install filter into fil-
ter bowl. Make
sure plastic center
tube is tightened
securely. Hand
tighten filter bowl.
Hand tighten gun
handle.
sure plastic center
tube is tightened
securely. Hand
tighten filter bowl.
Hand tighten gun
handle.
15. Clean tip, guard and
gasket with a soft bristle
brush to prevent part
failure due to dried
materials. Assemble
parts and attach loosely
onto gun.
brush to prevent part
failure due to dried
materials. Assemble
parts and attach loosely
onto gun.
Wipe sprayer, hose and
gun with a rag soaked in
water or mineral spirits.
gun with a rag soaked in
water or mineral spirits.
Pump Armor
ti2895a
ti5973a
ti5979a
FLUSH
ti5963a
ti5840a
ti5984a
FLUSH
ti5843a