Toshiba IK-CU44A Manuale Utente
15
(1) Detail setting in AUTO mode (auto electronic shutter)
When the FUNC button is pressed after AUTO is se-
lected, the submenu for SHUTTER:AUTO appears.
Set details in this screen.
lected, the submenu for SHUTTER:AUTO appears.
Set details in this screen.
LEVEL:
Adjust the auto electronic shutter
video level. Larger values indicates
brighter level, and vice versa. Data can
be set in a range of –30 to +30.
video level. Larger values indicates
brighter level, and vice versa. Data can
be set in a range of –30 to +30.
BLC:
Correction for backlight. This can be
set when the measurement area is set
to one of “1/2”, “1/8” and “SLIT” for
AREA in the main menu. Backlight is
corrected at ON, but not at OFF. When
the measurement area is “1”, BLC is
displayed in black letters and setting
is impossible.
set when the measurement area is set
to one of “1/2”, “1/8” and “SLIT” for
AREA in the main menu. Backlight is
corrected at ON, but not at OFF. When
the measurement area is “1”, BLC is
displayed in black letters and setting
is impossible.
PEAK:AVE:
Selects peak or average for measure-
ment of auto electronic shutter video
level. The peak to average ratio can
be changed in a range of 00:10 to
10:00.
ment of auto electronic shutter video
level. The peak to average ratio can
be changed in a range of 00:10 to
10:00.
Note:
• While BLC is ON, PEAK:AVE is displayed in
black letters and setting is impossible.
1
Move the cursor to a desired item (LEVEL, BLC,
PEAK:AVE) using the UP or DOWN button. Press
the FUNC button. The cursor moves to the data
of the selected item. Set the data by pressing the
UP or DOWN button.
PEAK:AVE) using the UP or DOWN button. Press
the FUNC button. The cursor moves to the data
of the selected item. Set the data by pressing the
UP or DOWN button.
2
After setting the data, press the FUNC button. The
cursor moves to the item. To finish setting of
submenu, move the cursor to “EXIT” and press
the FUNC button to return to “SHUTTER” in the
main menu.
cursor moves to the item. To finish setting of
submenu, move the cursor to “EXIT” and press
the FUNC button to return to “SHUTTER” in the
main menu.
(2) SS (synchronized scan)
1
Move the cursor to “SS” using the UP or DOWN
button. Press the FUNC button. (SS is set.)
button. Press the FUNC button. (SS is set.)
2
Press the FUNC button. The cursor moves to the
data and blinks. The data varies in 1/525H to 262/
525H when the UP or DOWN button is pressed.
Set a desired data, and press the FUNC button.
data and blinks. The data varies in 1/525H to 262/
525H when the UP or DOWN button is pressed.
Set a desired data, and press the FUNC button.
3
Return to “SS” of SHUTTER.
SHUTTER
FILE
1/100
1/60
1/500
1/1000
1/2000
1/4000
1/10000
1/250
262/525H
PEDESTAL
SYNC
AREA
W B-OFFSET
INIT.
END
SS
EXIT
PUSH FUNC TO SUB M ENU
AUTO
LEVEL
00
BLC
OFF
PEAK:AVE
00:10
EXIT
PUSH FUNC TO SELECT
UT
H
S
TER:AUTO
SUB MEN U
LEVEL
00
BLC
PEAK:AVE
EXIT
PUSH FUNC TO SELECT
UT
H
S
TER:AUTO
SUB MEN U
Example of display for LEVEL
SHUTTER
FILE
1/100
1/60
1/500
1/1000
1/2000
1/4000
1/10000
1/250
262/525H
PEDESTAL
SYNC
AREA
W B-OFFSET
INIT.
END
SS
EXIT
PUSH FUNC TO SELECT
AUTO